jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
Tekstowy podgląd strony 37 (kliknij aby zobaczyć)
5-3. ELECTRICAL ADJUSTMENT (When the Main PC board or the LCD panels are replaced.)
Step Figure Explanation
Press the [Electrical Adjustment] button. 1
Choose the menu which is suitable for parts replaced. (A) When you changed the LCD panel only, then select the [LCD Panel] button. ( 5-3-1 ) 2 (B) When you changed the Main PC Board only, then select the [Main PC Board] button. ( 5-3-2 ) (C) When you changed the Main PC Board and LCD Panels, then select the [Main PCB and LCD] button. ( 5-3-2 )
5-3-1. When a panel was replaced. 5-3-1-1. Flicker Adjustment
Step Figure Explanation Input Signal : RGB flicker pattern (1) Select a red single color screen when adjusting R. Click the [WM6] button, and adjust the flicker level to minimum in both [+] and [�] directions, taking note of the data values. Then set data to the mid-point between the two previously noted values (2) Adjust other colors to be the same, using [WM5] for green and [WM4] for blue. (3) Click the [Upside Down] button to change projection mode. (4) Adjust this mode in the same way. (5) Click [Next] buttons. Recommendation value : 40 � 50